M-Edge Guardian case - Installing Your Kindle

CONTINUED ON NEXT PAGE
CONTINUED: STEPS AND PROCEDURES FOR PROPER CASE FUNCTION
CONTINUED: STEPS AND PROCEDURES FOR PROPER CASE FUNCTION
INSTALLING YOUR KINDLE:
 Place your Kindle face-up into the molded tray.
 Close the Case Front.
 Latch the Hook of the Latch-Locking Mechanism into the corresponding Hook
Groove on the front of the Guardian Case.
 Push the Latch-Locking Mechanism Tab down and onto the back of the Guardian
Case until the Latch-Locking Mechanism is locked and secure.
Repeat steps 3 and 4 until all four Latch-Locking Mechanisms are secure.
1 2 3 4
1
2
3
4
SECTION I