M3 Mobile OX10 User Manual

Getting Started
12
If PDA is in right position, charging LED will indicate red and it will start charging the
battery. It will change to green when the battery is fully charged.
If the charging LED is not turned on, please re-insert the device to the cradle.
LED Color
Description
Red
The battery is charging.
Green
The battery is fully charged.
Do not exposure the battery to excessive temperature.
Acceptable user temperature range is -20
o
C (-4
o
F)~60
o
C (140
o
F)
It will take approximately 4 hours to fully charge from deplete state using the
supplied charging cradle.
Charging spare battery
Position the spare battery to battery pack of the cradle as indicated in the following
figure.
Charging LED on the cradle indicates the charging status.

M3 Mobile OX10 Specifications

General

Display diagonal	3.5 \
Display resolution	480 x 640 pixels
ROM capacity	1000 MB
Internal memory	0.256 GB
Internal memory type	RAM
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Processor family	-
Processor frequency	0.833 GHz
Data network	EDGE, GPRS, GSM, HSPA+, UMTS
Wi-Fi standards	802.11a, 802.11b, 802.11g
Bluetooth version	2.1+EDR
GSM bands supported	850, 900, 1800, 1900 MHz
Security algorithms	AES, CCX v4, EAP-FAST, EAP-TLS, EAP-TTLS, LEAP, TKIP, WEP, WPA, WPA2
WCDMA bands supported	800, 850, 1900, 2100 MHz
Rear camera resolution (numeric)	3.2 MP
Storage temperature (T-T)	-20 - 50 °C
Operating temperature (T-T)	-30 - 70 °C
Battery capacity	3300 mAh
Product color	Black, Orange
Keyboard layout	Alphanumeric
International Protection (IP) code	IP65
Operating system installed	Windows CE 6.0

Weight and Dimensions

Depth	24.9 mm
Width	78.6 mm
Height	165.5 mm
Weight	332 g