MA lighting grandMA3 Installation

1
Hint:
Install the grandMA3 xPort Node DIN-Rail on the rail following DIN EN 60715.
Important:
Install the grandMA3 xPort Node DIN-Rail horizontally so that the input terminal is located at the bottom and the DMX
terminal on top.
Warning:
In order for the device to dissipate heat, comply with a minimum distance of 30 mm (approx. 2 inches) above and
beneath the grandMA3 xPort Node DIN-Rail.
1
Installation

MA lighting grandMA3 Specifications

General

Brand	MA lighting
Model	grandMA3
Category	Music Mixer
Language	English