Need help?Do you have a question about the mabe PTAN9150MWW and is the answer not in the manual?
General disclaimer regarding the intended audience and potential risks of appliance repair.
Instructs users to disconnect power before servicing the product to prevent injury.
Emphasizes the importance of reconnecting all grounding devices after service.
Explains the meaning of each character used in the washer model number for identification.
Compares key features between current and new top-load washer models.
Describes the main controls and user interface elements of the washer's control panel.
Details options for cycle selection, temperature, and spin levels available on the control panel.
Explains features like Delayed Start, Options, Signal activation, and Lid Lock functionality.
Specifies standpipe height and diameter requirements for proper washer drainage.
Details faucet type, water pressure, and hot water temperature for washer installation.
Outlines the parts covered, warranty duration, and replacement policies.
Lists conditions and damages that are not covered under the product warranty.
Instructions for correctly adding bleach, detergent, and fabric softener to the dispenser.
Guidelines for loading clothes loosely and evenly around the Infusor for optimal performance.
Table detailing water consumption (gallons and liters) based on water level and load size.
Table showing wash, final spin, and total cycle times for various wash programs.
Explains the Infusor wash technology, its water efficiency, and common consumer observations.
Addresses issues related to lint accumulation and insufficient water fill during cycles.
Discusses variations in cleaning effectiveness and causes of fabric wrinkling.
Covers water temperature consistency, machine vibration, and tub/basket stability concerns.
Details the sequence of operations from level detection to the main agitation phase.
Explains the rinse fill process, including shower and deep rinse, and the intermediate spin patterns.
Visualizes the steps involved in the shower rinse cycle, including water admission and rinsing blocks.
Visualizes the steps of the deep rinse cycle, including water injection and agitation.
Describes the washer's actions during the final spin, including draining and speed adjustments.
Illustrates the flow of operations for cycles with and without fabric softener selection.
Identifies key components located on the upper part of the washing machine.
Identifies internal components such as the motor, transmission, and drain pump.
Step-by-step instructions with images for removing the washing machine's control panel.
Instructions for detaching the top panel of the washer to access internal components.
Steps for removing the main electronic control board after accessing it.
Guides for removing the infusor and initial steps for transmission removal.
Details on separating the tub assembly and disconnecting suspension rods and hoses.
Instructions for removing the motor, belt, drain pump, and wax switch.
Explains the ATC thermistor's role in temperature control and its resistance characteristics.
Describes resistance and voltage tests for the water inlet valves.
Describes resistance and voltage tests for the drain pump.
Instructions for testing the wax motor's function using a voltage cord.
Provides resistance measurements for the motor's windings and connections.
Explains how the shifter system utilizes the wax motor to switch between spin and agitate modes.
Describes the speed sensor's function and methods for testing its output.
Details the electrical sequence for engaging the lid lock mechanism during cycle start.
Explains the process for releasing the lid lock after the wash cycle completes.
Lists error codes (e.g., F8, Er8) associated with lid lock malfunctions.
Provides resistance readings for each position of the 12-position program selector switch.
Provides resistance readings for each position of the 5-position selector switch.
Illustrates the electrical connections between various components and the main control board.
Instructions for activating the service diagnostic mode by pressing specific buttons.
Instructions for returning the washer from service mode to normal operating mode.
Maps knob positions to specific component tests and their corresponding LED feedback.
Lists warning and error codes, their triggers, and associated LED patterns.
Provides resistance readings for the wax motor, drain pump, motor, and speed sensor.
Details the voltage outputs from the pressure sensor at different water fill levels.
Pin assignments and connections for primary circuit board connectors.
Pin assignments and connections for secondary circuit board connectors.
To Next Page
General
