Air
cleaner service
A dirty air cleaner
will
restrict air flow
to
the
carburetor.
To
prevent carburetor
malfunction, service the air cleaner regulary. Service more frequently when
operating the generator
in
extremely dusty areas.
f!'\Wl'l;;l~i!Nij
Using
gasoline
or
flammable
solvent
to
clean
the
filter element can cause a fire
or
explosion. Use only soapy water
or
nonflammable
solvent
I NOTICE I Never run the generator
without
the air cleaner. Rapid
engine wear
will
result
1.
Unsnap the air cleaner cover clips.remove the air cleaner cover, and
remove the element.
2.
Wash the
element
in
a solution of household detergent and warm
water, then rinse
thoroughly; or wash
in
nonflammable or high flash
point solvent, Allow the element to dry thoroughly.
3.
Soak the element
in
clean engine oil and squeeze out the excess oil.
The engine will smoke during initial start-up if too much oil is left
in
the
element.
4.
Reinstall the air cleaner element and the cover.
25
AIR CLEANER COVER
ELEMENT
To Next Page
Loading...
