Mac allister MPWP1800-3 - Page 28

EN
28
In more detail...
MPWP1800-3 by MacAllister
EN
Care and maintenance
Maintenance
Before and after each use, check the product and accessories (such as
application tools) for wear and damage. If required, exchange them for new ones
as described in this instruction manual. Observe the technical requirements.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts
are available at an authorized dealer or through our customer service.
Description Model no. or Specication
Nozzle
Remove any dirt deposits from the nozzle (17/18) hole using the cleaning needle
(20) (Fig. 18).
18 17
20
Fig. 18
Water lter
> Unscrew and remove the water inlet hose adaptor (19) from the water inlet (14).
> Disassemble the water inlet hose adaptor (19) (Fig. 19).
> Rinse the water filter (19a) with clear wate .
19a
19
Fig. 19
MNL_MPWP1800-3_MAC_GB_V6_200527.indd 28 5/27/20 5:54 PM