Mac allister MPWP2100-2 - Page 11

20 21
MPWP2100-2 By MacAllister MPWP2100-2 By MacAllister
Getting Started . . .
Getting Started . . .
Before you start
Vario nozzle The high pressure
nozzle is intended for a large choice of applications and
cleaning effects. 1.
Always attach the extension lance (13) when using the nozzle (19) (Fig. 9).
16
13
1.
2.
3.
4.
Fig. 9
2.
Press the unlock button (13a) and attach the nozzle (19) to the extension lance (13). Release the button (13a) to secure the nozzle in place (Fig. 10).
3. Check if the nozzle
(19) is attached properly by pulling on it. It should not pull out.
13a
19
1.
2.
Fig. 10
4. Turn the nozzle (19) to adjust the required setting. Use the fan spray to
clean wooden decks, vehicles, etc. When cleaning always start with the fan spray
and hold the lance at least 30 cm away from the surface being cleaned to avoid damaging it. Use the pin spray for maximum cleaning effect (Fig. 11).
Fig. 11
Rotary nozzle The high pressure rotary nozzle is intended for maximum cleaning effect. Keep the
spray wand
15-20 cm away from the surface being cleaned at all times.
1.
Always attach the extension lance (13) when using the rotary nozzle (14) (Fig. 12).
16
13
1.
2.
3.
4.
Fig. 12
2.
Press the unlock button (13a) and attach the
rotary
nozzle (14) to the extension
lance (13). Release the button (13a) to secure the nozzle in place (Fig. 13).
3. Check if the nozzle
(14) is attached properly by pulling on it. It should not pull out.
13a
14
1.
2.
Fig.
13
NOTE: Always keep a reasonable distance between the nozzle and the object to be washed in order to avoid damage.
Before you start
GP65-3663602939702-EN-V06.indd 20-21 11/2/16 6:05 PM