MAC Audio MMC 910 User Manual

MMC 910
Software Update
- TWS function -
Important Notes

MAC Audio MMC 910 Specifications

General

Brand	MAC Audio
Model	MMC 910
Category	Speakers
Language	English

Summary

Important Notes for Software Update

Read and Understand Instructions

Read and understand instructions before proceeding with software update. Follow all steps exactly. Errors may cause irreparable damage.

Manufacturer Liability

Magnat Audio-Produkte GmbH accepts no liability for erroneous updates or resulting unit damage.

Installing the Software Update

Download and Prepare Update File

Download update file from website. Copy to empty USB storage (4GB max, FAT 16/32). Do not rename the file.

Perform Update on Speaker

Switch on speaker, select USB source, insert USB. Display shows 'UPD', then 'DONE'. Switch off and remove USB.

Update Second Speaker

Repeat the software installation steps for the second MMC 910 speaker.

TWS Function Setup

Connect Two MMC 910 Speakers

Switch on both speakers. Press TWS button until 'TWS ON' and then 'HOST' appears on first. On second, press TWS until 'HOST', then Track +/- to switch to 'SLAVE'.

Pair Host Speaker with Mobile Device

Pair your phone/tablet with the 'HOST' MMC 910 via Bluetooth. Search for 'Mac Audio MMC 910'.

Control Settings

Once connected, control volume, play/pause, EQ, etc., on both HOST and SLAVE speakers.

Microphone and Guitar Input

Microphone and guitar inputs only function on the speaker they are physically connected to.