MAC DROP REVOLUTION - Page 4

3.16. ATTENTION: if used in the correct way and it is in a good state, the high pressure cleaner sends
forth a sonorous level of pressure (noisiness) less than 90 Dbas, for which necessary particular
protections are not made for the operators.
4. Characteristics of the high pressure cleaners
The high pressure cleaners DROP are divided in the following models:
Model
Max.pressure
(bar-psi)
Max. flow
(l/min-gal/min)
Installed Power
(KW)
Voltage
50Hz (V)
Weight
(Kg-lb)
Water temp.
(°C-°F)
120/11
120-1740
11-3
2.8
230
100-220
30-100/85-212
130/10
130-1885
10-2.6
2.8
230
100-220
30-100/85-212
160/15
160-2321
15-4
4.5
400
120-264
30-100/85-212
200/15
200-2900
15-4
5.8
400
120-264
30-100/85-212
5. Instruments of the high pressure cleaner
Q1: Main Switch
K1: Thermostat with switch
MA: Pressure gauge
SD: Detergent tank cap
IN: Connection to the water supply (inlet)
OUT: Connection to the lance (outlet)
6. Transport and unpacking
6.1. Submit lifting and transport to
specialized personnel. To protect the
machine, especially during the
transport on road, from bumps, damps
or from vibrations, etc…; the high
pressure cleaners are climbed on
wheels and therefore they must firmly
be anchored before the beginning of
the transport. To underline the
dangerousness in the moving of the
suspended loads, operators must be
warned about risks to collisions.
6.2. To unpack the high pressure cleaner,
verify the one is not damaged and has
got all the parts and components. In
the case in which the machine is
damaged, please call the supplier and
do not use the machine. We remember