manual utilizare presostat electronic
pressystem
9
i
n
g
C
o
n
d
i
t
i
o
n
s
Temperatura ambientala: intre +5°C si +40°C
Umiditate relativa maxima: 50% la +40°C
(fara condens)
Temperatura lichidului pompat: intre +1°C si
+40°C
Tipul lichidului pompat: Apa fara chimicale
adaugate (ph 5÷9) si fara materii solide sau
vascoase ce pot obstructiona teva de 1’’
PresSystem nu poate fi utilizat in instalatii cu
lichide abrazive, solide fibroase, lichide
inflamabile, explozive sau chimicale agresive.
PresSystem trebuie instalat in locuri ferite de
inghet si de intemperii.
Instalarea PresSystem trebuie facuta intr-un
sistem ce nu este expus loviturilor de berbec
(ex: cu vas de expansiune). Vasul de
expansiune trebuie intretinut corespunzator.
Ambient temperature between +5°C and
+40°C
Max humidity: 50% at +40°C (without
condensation)
Temperature of fluid between +1°C and
+40°C
Nature of liquid: water with no chemical add
(ph 5÷9) and with no solids acts to obstruct
the pipe 1''
PresSystem can not be used with abrasive
liquids, solids fibrous, flammable, explosive
and aggressive.
PresSystem must be installed in a place
protected from frost and bad weather.
The installation of PresSystem in a hydraulic
system must be designed to avoid
overpressure due to water hammer. The
expansion tanks must be properly
maintained.