Need help?Do you have a question about the Machtric S900 E Series and is the answer not in the manual?
General| Model | S900 E Series |
|---|---|
| Frequency | 50Hz / 60Hz (depending on model) |
| Power Output | 900W |
| Protection Features | Overload, Short Circuit |
| Cooling | Fan Cooling |
Guidelines for safe transportation, installation, wiring, power-on, and testing of the inverter.
Precautions for inspection, maintenance, emergency stop procedures, and proper disposal of the inverter.
Procedures for unpacking, understanding the model, and reviewing technical specifications of the S900 E inverter.
List of serial models and instructions for proper inverter storage to maintain performance.
Specifies environmental conditions and installation requirements for optimal inverter performance and longevity.
Diagrams and tables illustrating physical dimensions and mounting clearances for inverter installation.
Details on main circuit connections, peripheral devices, and important wiring notices for safety.
Explains control circuit terminals, diagrams, layout, descriptions, and wiring instructions for proper connection.
Introduction to the operation panel, its keys, and display items for controlling the inverter.
Step-by-step guide for operating the inverter via the panel, including parameter setting examples.
Parameters for monitoring system status like frequency, current, voltage, and fault records.
Parameters for core inverter functions including frequency, time, voltage, and motor settings.
Parameters for analog and digital I/O, controlling inputs, outputs, and terminal functions.
Parameters for advanced functions like jog, PLC, PID, torque limiting, and braking.
Parameters for PLC programming, sequence control, and PID process regulation.
Parameters for RS-485 communication setup and advanced system configuration settings.
Guidelines for daily and periodic inspection of the inverter, including checks for faults and environmental factors.
Information on replacing parts, troubleshooting common faults, and interpreting alarm indications.
Methods to reduce electrical noise generated by the inverter and prevent interference with other devices.
Description of essential peripheral devices like breakers, contactors, reactors, and filters for inverter installation.
Details on selecting brake resistors, including power, resistance, torque, and calculation formulas.
An example demonstrating a three-wire connection, parameter settings, and action instructions for inverter control.
To Next Page