Need help?Do you have a question about the Mackie MOBILE MIX and is the answer not in the manual?
General| Type | Digital Mixer |
|---|---|
| Outputs - Main | 2 |
| Outputs - Headphones | 1 |
| USB | Yes |
| Power | External power supply |
| Effects | Reverb, Delay |
Overview of the MobileMix mixer and its purpose.
Lists the main features and capabilities of the MobileMix mixer.
Provides important usage tips and best practices for operating the mixer.
Introduces the connectors and controls located on the rear panel of the mixer.
Details the USB-C port for powering the MobileMix mixer.
Explains the function and operation of the mixer's power switch.
Describes the combo input jacks for microphones and line-level signals.
Details the stereo line input jacks for instruments and audio sources.
Explains the secondary stereo line input for phones, tablets, or cameras.
Describes the mix output jacks for connecting to monitors or recorders.
Details the main output jacks for connecting to amplifiers or speakers.
Introduces the controls and features found on the top panel of the mixer.
Explains the meaning of the "U" symbol on controls, indicating unity gain.
Describes the gain knobs for adjusting input sensitivity on channels.
Explains the switches for selecting line or Hi-Z (instrument) input impedance.
Details the low-cut filter switches for reducing low frequencies.
Describes the 2-band shelving EQ controls for tone shaping.
Details the high-frequency equalization adjustments.
Details the low-frequency equalization adjustments.
Describes the knobs for controlling the level of effects sent from each channel.
Explains the knobs for adjusting the output level of each channel to the main mix.
Details the Bluetooth pairing switch and status indicator.
Describes the headphone output jack for monitoring the audio mix.
Explains the primary input jack and its associated pad switch.
Controls the volume level for the primary input source.
Adjusts the output levels for Mix 1 and Mix 2.
Describes a set of unique momentary switches with novelty functions.
Controls the blend between main inputs and the primary source.
Indicates the power status of the mixer.
Explains the phantom power switch for condenser microphones.
Allows selection between different internal effects (Plate, Hall, Reverb+Delay).
Sets the overall level of the applied effects.
Adjusts the volume level for the headphone output.
Controls the overall output level of the main mix.
Displays signal level indicators for monitoring audio peaks.
Details how to power the mixer using a portable battery.
Instructions for accessing and removing the battery compartment cover.
Step-by-step guide for installing a portable battery.
Describes the integrated slot for holding a phone or tablet.
Illustrates a typical audio setup for camping scenarios.
Demonstrates a setup configuration for live streaming and podcasting.
Provides tips and procedures for resolving common issues with the mixer.
Addresses specific problems like Bluetooth connectivity issues.
Guides users on obtaining warranty and non-warranty repair services.
Compiles detailed technical specifications for the MobileMix mixer.
Presents a block diagram illustrating the mixer's internal signal paths.
To Next Page
