Do you have a question about the Macro MA-1210FER and is the answer not in the manual?
Indicates ignition failure or flame has been extinguished during operation.
Signifies an issue with abnormal air pressure or fan malfunction.
Error related to overheating or gas solenoid malfunction.
Indicates a failure in the temperature sensor.
Triggered when the unit's over-temperature protection activates.
Indicates a residual flame condition.
Only use specified gas type and power supply voltage for safe operation.
Do not block the vent cover and keep windows open for ventilation.
Keep flammable materials away from the water heater to prevent fire.
Test water temperature before use to avoid scalding; adjust mixers carefully.
Do not touch the water while the heater is in operation.
The water heated by this appliance is not suitable for drinking.
Turn off gas valve and power supply when the heater is not in use for a period.
Do not install the water heater outdoors to prevent damage from elements.
Securely fix the heater body using appropriate bolts and mounting screws.
Use fire resistance insulation between the wall and heater if wall is combustible.
Ensure adequate space surrounds the heater for maintenance and airflow.
Connect water inlet, outlet, and gas pipes with stop valves fitted at inlet points.
Install the pipe cover panel after checking for pipe leakages.
Use AC 230V, 50Hz power; ensure sockets are moisture-proof and earthed.
Steps to turn on hot water tap, open gas valve, and plug in power.
Use UP/DOWN keys to adjust temperature between 36-60°C.
Turn on tap after setting temperature; test water temperature before use.
Overview of i-TEMP, ECO, and BATHTUB modes for different usage scenarios.
Details on ON/OFF, UP/DOWN, and MODE touch keys and buzzer feedback.
System stores last setting if powered off normally; uses default on immediate restart.
Heater must be serviced or repaired by a qualified technician.
| Brand | Macro |
|---|---|
| Model | MA-1210FER |
| Category | Water Heater |
| Language | English |