Madel Zoning System Crono-TM

Need help?

Do you have a question about the Madel Zoning System Crono-TM and is the answer not in the manual?

Summary

Technical Characteristics

Control Board Specifications

Details specifications for the ZONING system's control board, including power, consumption, and operating parameters.

Thermostat Specifications

Outlines the technical specifications for the ZONING system's thermostat, covering power, autonomy, and environmental conditions.

Locating and Maintaining Thermostats

Optimal Thermostat Placement

Guidance on ideal thermostat positioning for accurate temperature sensing and system performance.

Battery Replacement Guide

Instructions for changing thermostat batteries when low battery indicator appears, recommending alkaline types.

Troubleshooting Common Issues

Zone Malfunction Diagnosis

Steps to resolve issues where a specific zone is not functioning correctly, checking settings and battery.

Seasonal Transition Performance

Troubleshooting operational problems when switching between winter and summer modes, focusing on thermostat settings.

Zone Closure Delay

Explains potential delays in zone closure, mentioning delay timers and battery status.

Operation with Crono-TM; TZ-TEMP Thermostats

System Startup Procedure

Steps to start the zoning system using the MASTER thermostat, including mode and set-point selection.

Conditioning and Switching Zones

Instructions for conditioning individual zones and switching them on/off, including system-wide shutdown.

Economy and CMV Modes

Explanation of ECO mode for energy saving and enabling Controlled Mechanical Ventilation (CMV).

Timer and Weekly Programming

Timer Adjustment (ON;OFF)

Procedure for setting timer ON and TIMER OFF functions for zone switching.

Time and Date Configuration

Steps to adjust the current time and date for accurate system operation.

Weekly Programming Setup

Guide to programming daily schedules for connection and disconnection periods for the entire system.

Operation with KARESS-TM;TZ Thermostats

KARESS Thermostat Functions

Overview of KARESS thermostat features including indicators, buttons, and operating modes.

System Startup and Zone Control

Instructions for starting the system and managing individual zones using KARESS thermostats.

Economy, CMV, and Timer Functions

Details on using ECO mode, CMV enabling, and setting TIMER ON/OFF functions on KARESS thermostats.

KARESS Programming and Timing

KARESS Timer Adjustment

Procedure for setting Timer ON and Timer OFF functions on the KARESS thermostat.

KARESS Time and Date Setup

Steps to configure the time and date settings for the KARESS thermostat.

KARESS Weekly Programming

Guide to setting up weekly schedules, including programming, copying, and deleting periods.

Warranty Information

Spanish Warranty (Garantía)

Details MADEL ATD's two-year warranty against production defects, covering replacement and procedure.

French Warranty (Garantie)

MADEL ATD's two-year guarantee against manufacturing defects, including repair or replacement and contact procedures.

Italian Warranty (Garanzia)

MADEL ATD's two-year warranty for production defects, specifying coverage and required return procedures.

English Warranty (Warranty)

MADEL ATD's two-year warranty for defects, covering repair/replacement and outlining the procedure for faulty equipment.