HiTemp140 Series and HiTemp140-PT Series
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
To view the full MadgeTech product line,
visit our website at www.madgetech.com.
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
MadgeTech, Inc.
6 Warner Road
l
Warner, NH 03278
Phone 603.456.2011
l
Fax 603.456.2012
www.madgetech.com
l
info@madgetech.com
DOC-1211035-00 REV 8 2013.04.30
HiTemp140 Series
Autoclave Temperature Data Loggers
***Probe lengths up to 7” available upon request.
Product Information Card
HiTemp140-PT Series
Autoclave Temperature Data Loggers with 24” Flexible Stainless Steel Probes
Specication HiTemp140 HiTemp140-PT
Temperature Sensor 100Ω platinum RTD
Probe Range –200 to +260°C
Temperature Resolution 0.01°C
Temperature Accuracy
±0.1ºC/±0.18ºF (20ºC to +140ºC/68ºF to +284ºF)
±0.3°C/±0.54 ºF (-20°C to +19.99°C/-4°F to +67.98°F)
±0.4°C/±0.72ºF (-40°C to -20.01°C/-40°F to -4.02°F)
Memory 32,700
Sample Rate 1 second up to 24 hours
Required Interface
Package
IFC400
Baud Rate 125,000
Typical Battery Life 1 year (1 minute reading rate at 25°C/77°F)
Operating Environment –40 to +140°C, 0 to 100%RH,
Material
316 Stainless Steal
Dimensions (Body: HiTemp140-1) 1.6” x 0.970” dia. (40mm x 24.6mm dia.)
Dimensions (Body: HiTemp140-2,
HiTemp140-5.25, HiTemp140-7, PT’s)
1.9” x 0.970” dia. (48mm x 24.6mm dia.)
Submersible Yes
Approvals CE
Model Number Dimensions (Probe)
HiTemp140-1 1.1” x 0.125” dia. (0.188” transitional diameter)
27mm x 3.2mm dia. (4.8mm transitional diameter)
HiTemp140-2 2.0” x 0.188” dia. (51mm x 4.8mm dia.)
HiTemp140-2-TD 2.0” x 0.125” dia. (0.188” transitional diameter)
51mm x 3.2mm dia. (4.8mm transitional diameter)
HiTemp140-5.25 5.25” x 0.188” dia. (133mm x 4.8mm dia.)
HiTemp140-5.25-TD 5.25” x 0.125” dia. (0.188” transitional diameter)
133mm x 3.2mm dia. (4.8mm transitional diameter)
HiTemp140-7 7.0” x 0.188” dia. (178mm x 4.8mm dia.)
HiTemp140-PT-1 Probe Tip: 1.7” x 0.125” dia. (42mm x 3.2mm dia.)
Flexible Portion: 22” x 0.062” dia. (559 mm x 1.6mm dia.)
HiTemp140-PT-5 Probe Tip: 4.8” x 0.125” dia. with 1” x 0.188 dia. handle (121mm
x 3.2mm dia. with 25mm x 4.8mm dia. handle)
Flexible Portion: 22” x 0.062” dia. (559 mm x 1.6mm dia.)
To Next Page
Need help?
General
