MadMapper MiniMad VIDEO - Page 17

17
MiniMad LIGHT CONTROLS
MICROMODUL8
- Blue buttons: direct access to the 16 rst sequences
- First master knob: master luminosity
- Second master knob: master audio-level
OSC
The miniMAD declares itself as “miniMAD Light( - Nickname)” using the Bonjour discovery protocol,
where Nickname can be specied in the the Export MadLight Sequences to miniMAD dialog, for
example: “miniMAD Light - MAIN ROOM”
List of commands:
- /playing + integer OSC value (0 = pause, 1 = play): play/pause the media playback
- /pause: pauses the playback
- /play: starts the playback after a pause
- /replay: restarts the current sequence
- /previous_sequence: previous sequence
- /next_sequence: next sequence
- /playback_mode/{playback mode index}: set the playback mode (cf media playback mode list in
MadMapper’s export window), example: /playback_mode/1 to set the Repeat sequence list playback
mode
- /media_name/{sequence name}: set the current sequence by name, example: /sequence_by_name/
light_sequence_3 to play the sequence called light_sequence_3
- /media_index/{sequence index}: set the current sequence by index, example: /sequence_by_index/2
to play the third sequence
- /media_index + integer OSC value: set the current sequence by index
- /master_audio_level + oat OSC value: set the master audio-level
- /master_luminosity + oat OSC value: set the master luminosity
Note that all indices start at 0.
OSD
When connected to an HDMI display, the MiniMad will display some useful information.