Maestro MR563 - Using Mixer Attachments; Use of Wire Whisk

8
For switching on the device, press and hold button (В/Fig.1) for low
and high speed depending on the required regime of handling as
shown in the table.
Table1
The release of a button switches off the device.
After using disconnect the electric drive from the mains, disconnect
the nozzle from the drive turning it counter clockwise.
Using the wire whisk for ufng /mixing liquid products.
To beat up the eggs, prepare cream and mayonnaise use the
nozzle – wire whisk (D/Fig.1)
ATTENTION! Do not use the wire whisk for mixing tight dough.
- Insert the shank of the wire whisk (D/ Fig.1) to the case of electric
drive (A/ Fig.1) as far as it will go and turn clockwise until xed.
Press and hold the switch on button (В/ Fig.1).
Table 2
Ingredients
Q-ty of the
product being
handled
Time of
handling
Speed
Fruits and
vegetables
50-100g 25-30s Low at the beginning
and high at the end
Baby food, sauces,
puree
50-200 25-30s Low or high
Beverages, shakes
and cocktails
50-500 25-30s High
Ingredients
Q-ty of the product
being handled
Handling
time
Speed
Cream 125-150ml 25-30s Low at the beginning
high at the end
White of the egg 2-3 eggs 25-30s Low at the beginning
high at the end