8
the handle to move the fryer.
Cleaning and maintenance
1. Before cleaning the fryer, please cut o the power and unplug it, and wait for the product
to cool down before proceeding.
2. If there is oil on the wall of the fryer cavity, please wipe it with a soft damp cloth soaked
in a neutral detergent. Do not use a strong corrosive detergent to clean it to prevent
damage to the machine and your health.
3. After use, please clean the fryer, frying pan and other accessories in time, which can be
taken out for washing in water.
4. Do not immerse the entire fryer in water or other liquids for cleaning to avoid electric
shock hazards or malfunctions.
5. Please do not use other cleaning equipment such as dishwasher to clean the air fryer,
otherwise it may cause damage and aect the use.
6. After cleaning, store the product in a cool and dry place after it has dried.
7. Please do not use hard and sharp objects (such as steel wire balls, blades, etc.) to clean
the fryer and pan to prevent scratching the surface of the product.
Fault analysis and troubleshooting
Failure Cause Solution
Product is not working Power is not plugged in Insert the power cord plug
into a grounded socket
Did not start Press the power button to
start
The fryer is not installed in
place
Put the fryer back in and
make sure it’s in place
No cooked food Too much food in the fryer If there are too many
ingredients, put them in the
fryer in batches
BBQ time is too short Increase cooking time
The food is not evenly
roasted
Did not shake during
cooking
Some overlapping or
staggered foods can be
pulled out of the fryer and
shaken appropriately during
the grilling process
The baked food is not crispy No traditional fried
ingredients are used
Appropriate fried snacks
can be used. If there is no
oily ingredients, a layer of
oil can be applied to the
surface.
To Next Page
Loading...