Page 5 of 7
Assembly Instructions
1.
Now the screen house is standing.
Secure it to t he ground with a stake
through the ring on the corner. Refer
to image 1.
2.
Attach the screen house to pole with
hook-and-loop tape . Refer to Image 2.
Step 3:
Step 4:
1.
To secure the guy ropes, locate the
plastic slider
and look for the portion
of the guy
rope
opposite the knot.
Pull this
portion, forming a loop(works
slip knot). Extend the guy rope to
the desired distance from the screen
house and secure the stake into the
ground. Refer to Image 1.
like a
To Next Page
Loading...
