2
en
Connecting Your Watch
The Magellan Echo watch can be connected
with iOS and Android devices (smartphones/
tablets) which have Bluetooth Smart. Please
visit magellanGPS.com/echo/devices for a list
of the latest compatible devices.
Press and hold the Power button
on the watch for 2 seconds to
enter the search mode.
Turn on the Bluetooth function
on your device for your Echo to
communicate with your device using Bluetooth
Smart.
Go to magellanGPS.com/start/echo for
compatible apps and connection instructions.
Note: Echo does NOT pair and connect with your
device’s operating system, so do NOT attempt to
pair your device with Echo after turning on your
device’s Bluetooth function. The same is true for other
Bluetooth Smart sensors such as a Heart Rate Monitor.
Battery
The Echo watch works on a CR2032 3V battery
and has an estimated battery lifetime of 10
months.
Note: The battery lifetime depends on usage of the
Echo watch (calculations have been done on 12h non
connected usage + 1h/day workout).
The watch will alert you when the
battery is running low.
To replace the CR2032 battery,
simply open the battery lid at
the back of the watch.
Replace the battery with the
POSITIVE side up and place the
battery lid back in place.
Note: After replacing the battery,
make sure that the O-ring is seated
properly into the groove before
closing the battery lid.
Note: When closing the battery lid, make sure that the
lid fits properly on all corners and then press to lock the
lid in place with a click sound.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
