Assembly Instructions
Step 3:
Cover the frame with Fabric
Shell
a) Lay the fabric over the roof.
b) Line up all corners, adjusting
from opposite sides. Fabric will
fit snugly.
c) Attach the hook and loop
fastener on the underside of the
roof fabric to the roof frame.
Tip: Pay careful attention
of the two hook and loop
fastener points shown on
right.
Step 4:
Extend the Legs:
Step on frame leg base.
Working from opposite sides,
slide the roof lock mechanisms
(located on upper leg portion)
upwards until they lock into
place. The amount of force
necessary will be much less if
you ensure the leg segment
remains in its slanted position.
Tip 1: Do not try and
straighten the legs as this
could damage the frame.
Tip 2: You will hear and
feel a click when the roof
lock is correctly secured at
each position.
Page 5 of 7
To Next Page
Loading...
