5 6
cleaning. Exposure to hot water
can cause damage to the seal in
the outer rim of the attachment.
Always inspect your blades before
each use.
Use of adapters and converters is
considered an unauthorized
modifi cation of the product and as
such will void the warranty.
The use of attachments not
recommended or not sold by the
manufacturer will void warranty
and may cause fi re, electric shock,
or injury.
Use of this product in locations
with di erent electrical
specifi cations may result in
damage to the product.
TO AVOID LEAKAGE, DO NOT
OVERFILL THE CUP. Your magic
bullet
®
cups are also marked with a
MAX line. When fi lling the cup or
pitcher, make sure your ingredients
do not exceed their respective
MAX lines.
The magic bullet
®
is not intended
for use in microwave ovens. Do not
place the magic bullet
®
cups,
power base or any accessories in a
microwave as this may result in
damage to the appliance.
Extractor blades are
sharp!
Handle carefully.
Do not remove the seal from your
blade attachment. The seal is not
designed to be removed. If seal is
removed, cease use immediately
and purchase a replacement.
If, over time, the extractor blade
becomes loose or damaged, you
may order a new extractor blade at:
www.bulletbrands.com.au /
www.bulletbrands.co.nz or contact
customer service.
We recommend replacing your
extractor blade every 6 months
(depending on use) or as needed
for optimal performance.
Blade attachments should not be
placed in the dishwasher for
product safety:
To prevent the overheating of the
ingredients being blended, never
allow the unit to run continuously for
more than 1 minute.
If the motor stops for any reason,
unplug the power base and let it
cool for at least 15 minutes.
If the magic bullet
®
malfunctions or
is dropped, or damaged in any
manner, discontinue use and
contact Customer Service for
further assistance.
NEVER USE THE MAGIC BULLET
®
WITHOUT ADDING LIQUID OR WHEN
THE CUP IS EMPTY, AS DOING SO
MAY DAMAGE THE BLADE
To Next Page
Loading...
