11 12
Using the magic bullet
®
.
3 Twist on the Cross Blade until
the blade and Cup are tightly
sealed.
2 Load the ingredients into
the Cup (do not exceed the
MAX line).
Using the magic bullet
®
is as easy as 1, 2, 3:
1 Before fi rst use, review all warning and caution statements in the
Important Safeguards section (pages 1–8). Clean Blending Cups and
Cross Blade with hot, soapy water before use.
“Lock-on” mode:
For hands-free operation, press
down and gently turn the Cup
clockwise until the tabs lock under
the lip of the Motor Base. Once you
are in lock-on mode, the motor will
run continually (do not run for
longer than a minute!). To stop
blending, simply twist the Cup
counter-clockwise to release.
4 Line up the tabs on the Cup
and with the tabs on the Motor
Base. Press the Cup down
onto the base to turn on the
machine.
Here’s how it works: The
magic bullet
®
will blend for
as long as you press the Cup
down onto the Motor Base. To
stop blending, simply release
pressure on the Cup.
To Next Page
Loading...
