EasyManua.ls Logo

Magic Leap One - Device Labels and Placement

Default Icon
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Labels and Label Placement:
The Certication label is located on the Lightwear’s inner left temple
of the device, between the picture camera and the back pad.
It reads as follows:
Class 1 Laser Product EN/IEC 60825-1:2014
This product is in conformity with
performance standards for laser products
under 21 CFR 1040, except with respect
to those characteristics authorized by
variance number FDA-2017-V-6521
eective December 27, 2017.
Note: Explanatory label does not appear on device.
Full label reproduction appears in this Safety Guide.
The Manufacturer Identication label is located on the back
of the Lightpack clip. Turn your Lightpack over to see it.
It reads as follows:
7500 W. Sunrise Blvd., Plantation, FL 33322
Assembled in Mexico
Model Number M1001 or M1002
Note: the date of manufacture is traceable by unique serial
number. The serial number is located under the rear t pad
on the inside of the Lightwear adjustment band.