MAGICO M6 - M6 Tension Rods Tightening Procedure; Setting the Torque Wrench

1. A TORQUE WRENCH IS INCLUDED IN
EACH ACCESSORY KIT TO CHECK
TORQUE ON EACH OF THE 10 FLAT
FASTENERS ON THE BACK OF THE M6.
2. SET THE TORQUE WRENCH FOR 115 INCH
POUNDS.
• LOOSEN THE LOCK AT THE
BOTTOM OF THE TORQUE
WRENCH.
• TURN THE HANDLE SO THE “5”
LINES UP WITH THE “110” ON THE
INCH-POUND SCALE.
• TIGHTEN THE LOCK AT THE
BOTTOM OF THE TORQUE
WRENCH.
TIGHTENING THE M6 TENSION RODS