9. USE A RATCHET AND A 9/16 OR 14MM SOCKET TO REMOVE THE “U” CLAMPS
FROM THE CASTER WHEELS.
10. USE A RATCHET AND ¾” OR 19MM SOCKET TO REMOVE THE LONG FASTENERS
THAT FASTEN THE SHIPPING BAR TO THE CRATE. REMOVE THESE FASTENERS
CAREFULLY, PUT A HAND BETWEEN THE RATCHET AND THE M6 TO PROTECT
THE CABINET.
11. REMOVE CHOCK BLOCKS FROM BEHIND THE CASTER WHEELS AND FROM
UNDERNEATH SHIPPING BAR.
To Next Page
Loading...