11. REPEAT THE PROCESS OF TILTING THE SPEAKER TO REMOVE THE CASTERS AND
REPLACE WITH THE SPIKES ON THE OTHER SIDE AND LOWER BACK TO THE FLOOR.
12. USING THE HEX KEY PROVIDED IN YOUR ACCESSORY KIT, TURN THE LARGE
THREADED STUD THAT IS PROTRUDING FROM THE FOOT TO LEVEL AND STABILIZE
THE SPEAKER.
13. SCREW ON THE FOUR BLACK KNOBS ON TO THE TOP OF THE SET SCREW THAT IS
PROTRUDING THROUGH THE
LEG OF THE SPEAKER.
To Next Page
Loading...