21
SAFETY INSTRUCTIONS
RISK OF BURNS
• DO NOT process hot ingredients (solid or liquid) in the BlendCups or
mill attachment, as blending hot foods in a lidded jug can lead to a
build-up of pressure, forcing out scalding steam or liquids.
• Processing hot foods in the main jug: blending hot ingredients at high
speed can lead to a build-up of pressure, forcing out scalding steam
or liquids. Always take care when pouring in a hot liquid, as it may
suddenly boil up and escape from the jug.
• Never introduce hot ingredients (solid or liquid) if they are over
60 °C in temperature. Always make sure the lid is firmly fitted but
the measuring cap is only loosely positioned, to allow any steam to
escape. Always use the SOUP programme or start at a low speed and
gradually increase it. Never use the PULSE button.
MAINS CONNECTION
• Your appliance must be connected to an earthed socket with the
original power cord.
• Check that the voltage indicated on its identification plate corresponds
to the voltage of your mains supply.
• Never allow the power cord to dangle over the edge of your worktop
or counter, and make sure that it does not come into contact with hot
surfaces.
AFTER-SALES SERVICE
• If the power cord has been damaged, it must be replaced by the
manufacturer, a Magimix-approved service agent or a similarly
qualified person, in order to avoid all risks.
• The use of parts that are not recommended or sold by Magimix may
result in injury, fire or electric shock.
KEEP THESE SAFETY INSTRUCTIONS
FOR FUTURE REFERENCE
To Next Page
Loading...
