Need help?Do you have a question about the Magma EB7-X8G2 and is the answer not in the manual?
General| Brand | Magma |
|---|---|
| Model | EB7-X8G2 |
| Category | Computer Hardware |
| Language | English |
Types of advisories used in the manual for warnings and information.
General safety guidelines for handling the expansion chassis and computer.
Precautions to prevent damage from electrostatic discharge to semiconductor devices.
Details the specifications of the Magma 7 Slot PCI Express Expansion System.
Steps to take before starting the Magma expansion chassis installation.
Lists the components included with the Magma expansion chassis.
Lists the tools needed to complete the Magma expansion system installation.
Initial steps and considerations before starting hardware installation.
Instructions on how to remove the top cover of the expansion chassis.
Guide on installing the Expansion Interface Card (EIF) into the chassis.
Details the settings for DIP switches SW1 and SW2 on the Expansion Interface card.
Instructions for installing the Host Interface card into the computer.
Steps to attach a low profile bracket to a PCIe card.
Guidance on installing PCIe cards into the expansion chassis.
Instructions on how to connect the iPass cable between the chassis and host.
Procedure for safely disconnecting the iPass cable.
Steps for connecting the power cord to the expansion chassis.
Procedure for powering on the Magma expansion chassis.
Instructions for powering on the host computer after the chassis.
Critical safety warning regarding the order of shutting down the system.
Verifying correct LED illumination after powering on the system.
Explains the function and expected state of the LinkUP 0 LED.
Describes the meaning of the Slot LEDs indicating PCIe card presence.
Details the LED indicators on the Expansion Interface card.
Explains the function of Hot Plug LEDs and their states.
Describes the Master RST LED and Power LED on the expansion board.
Information on Magma driver requirements for different operating systems.
Steps to verify the Magma installation in Windows.
How the Magma expansion chassis is recognized in Mac OS X.
Information about the Expansion Slot Utility in Mac OS X.
Using Apple System Profiler to verify Magma expansion chassis recognition.
Steps for verifying Magma installation in RedHat Linux using `lspci`.
Useful Linux commands for checking the Magma device status and configuration.
Instructions for opening the PCIe expansion chassis.
Detailed steps for installing third-party PCIe cards into the chassis.
Verifying the system is operational after installing PCIe cards.
Overview of SNMP features supported by the EB7-X89G2-RAS chassis.
Lists the monitoring and administration features provided by SNMP.
Steps to configure SNMP settings for remote monitoring.
How to configure network settings for the chassis via a web interface.
Setting up SNMP community names and trap destination.
Viewing and monitoring internal chassis temperatures via SNMP.
How to change the default SNMP user name and password.
Procedure to restore factory default settings using the Alarm Reset Button.
Information on configuring an SNMP agent with the MIB file.
Location and procedure for downloading the MIB file.
Using a MIB Browser to access SNMP functions and status information.
Remotely turning the chassis off and on using SNMP.
Configuring voluntary I/O switching between PCs using SNMP.
Final steps after system setup, like replacing covers.
Information on removing and replacing PCIe cards without shutting down the system.
Detailed steps for hot-plugging/swapping PCIe cards in Windows.
Procedure for hot-plugging/swapping PCIe cards in Linux environments.
Explains the functions controlled by the Alternate Function DIP Switch.
Requirements for EEPROM loading for PCIe Gen II mode operation.
Function of the EEPROM Write Protect jumper.
Setting the I2C address for the PCIe switch.
Using the chassis for high-performance video card expansion.
Steps for performing routine general cleaning of the chassis.
Instructions for replacing a failed fan module in the chassis.
How to replace a hot-swappable power supply module.
Procedure for cleaning the chassis air filter.
Overview of status indicators and configuration switches for troubleshooting.
Explains the meaning of chassis slot power indicator LEDs.
Indicators for verifying connectivity between host and chassis.
Configuration of the SNMP power-on source jumper.
General steps to identify and troubleshoot system problems.
Troubleshooting steps when the computer does not detect the expansion system.
Troubleshooting steps for when the system or chassis does not turn on.
Steps to resolve issues where the computer hangs during power-up.
Flowchart and steps to troubleshoot a non-functional PCIe card.
Interpretation of Windows error codes related to device issues.
Troubleshooting hangs caused by too many add-in cards.
Instructions for installing the chassis into a rack.
How to attach screws to rack posts for mounting.
Steps for attaching slide rails to the rack.
Instructions for attaching the chassis to the slide rails.
Common questions and answers regarding the Magma system.
Information on how to contact Magma technical support for assistance.
Description of PCIScope, a diagnostic tool for PCI subsystems.
Procedure for returning products to Magma for service or replacement.
Explains how to configure multiple Magma expansion systems.
Describes the fan-out configuration method for expanding PCIe slots.
Explains the daisy-chain configuration for adding PCIe slots.
Troubleshooting conflicts between installed PCIe cards.
Correct power-on sequence for advanced configurations.
Approach to troubleshooting problems in multi-expansion configurations.
How to switch I/Os between servers using SNMP.
FCC compliance statement for the device.
Industry Canada compliance statement for the device.
CE compliance statement for the device.
To Next Page
