To Next PageTo Next Page
Need help?Do you have a question about the Magner 165 Series and is the answer not in the manual?
General| Brand | Magner |
|---|---|
| Model | 165 Series |
| Category | Cash Counter |
| Language | English |
Describes compliance matters for safe product use and prevention of damages.
Warns about risks from improper installation, placement, and ventilation.
Details grounding procedures for static electricity, noise failure, and electrical safety.
Warns about using specified power cords, plugs, and avoiding modifications.
Advises on safe handling practices, avoiding water, shock, chemicals, and external cables.
Warns about keeping hands/clothes away from moving parts and doors.
Advises contacting distributors for repairs, checking stability, and handling issues like smoke.
Lists optional accessories like an external display.
Describes different series (165, 165S, 165B) and their features.
Identifies components visible from the front of the machine.
Identifies components visible from the rear of the machine.
Guides on avoiding damaged/folded notes and aligning them for accurate counting.
Explains the function of each key (LS1, LS2, RS1, RS2, Arrow, Start).
Describes the meaning of different LED lights on the machine.
Details operations triggered by key combinations and drag patterns.
Illustrates various screen modes activated by key presses.
Explains the purpose of numbered display elements and their navigation.
Details how to switch between Mix, SP, and SG counting modes.
Shows how to view total, stacker, and reject pocket counting results.
Explains how users can select version and denomination in SG mode.
Describes how to check serial numbers of counted notes on the screen.
Explains how to count barcodes and view recognized barcode data.
Details how to count checks and view recognized MICR information.
Explains how to count mixed currencies and view detailed results per currency.
Describes how only the first recognized currency is accepted in Multi SC mode.
Details how to turn on/off CF, UV, and MG detection and their related options.
Explains batching by total value using the dispenser function.
Covers SN Reading, Compare, and Black-list management.
Explains GT ON/OFF, Clear, Send, Result, and Batch options.
Details manual addition to results and entering deposit information.
Covers deleting, exporting, and viewing log data.
Explains size calibration and setting counting conditions manually.
Details FLAG, LCD Brightness, and Denomination display settings.
Covers time setup, printer, external display, key, and tacometer settings.
Details date/time setup and printer configuration options.
Explains external display types and key operation customization.
Details USB and Ethernet communication settings.
Explains upgrading, loading, exporting via USB and ENET connection.
Covers data transfer (Note info, Acq, Scanned) and server setup.
Explains PIN access for hidden menus and setting up Teller mode.
Shows how to view and edit user information (Name, Bank, Branch).
Details how to select Teller 1/2 and print their counting results.
Explains how to enter and print user name, bank, and branch information.
Details adjusting IR, UV, MG, and Double Level for currencies.
Shows SW Version, Product, Series, SN, and currency lists.
Explains testing the kicker, module, and stacker motors.
Explains testing the solenoid condition for different parts.
Details checking count sensors, CPU monitor, and LED conditions.
Lists currency, speed, capacity, display, dimensions, weight, power, and accessories.
Lists various error codes and their explanations for the machine.
Recommends daily sensor cleaning and turning off power before maintenance.
Illustrates the locations of up sensor module, down sensor module, and drive body.
