Flex 8EX A/B System Instruction Manual
June 2010
10 of 42
1.11: SPECIFIC SYSTEM WARNINGS
Below are some specific operating safety tips that should be strictly followed when operating a Flex 8EX-
A/B System:
1. Check the Status LED on the transmitter for any signs of low battery power (refer to page 39).
2. Check the Status LED on the transmitter for any signs of irregularities (refer to page 39).
3. Make sure the system is not set to the same channel as any other Flex systems in use within a
distance of 300 meters (900 feet).
4. Never operate a crane or equipment with two transmitter handsets at the same time unless
they are programmed with “Pitch & Catch” function. For information on the “Pitch & Catch”
feature, please refer to page 27 and page 38 of this manual.
To Next Page
Loading...