14 USER MANUAL
6. USE
6.1 Automatic cycle
After connecting the ATF EXTRA PRO to the vehicle’s battery, the display will show Firmware version
and serial number of the machine.
The following message will be shown next:
• Choose automatic cycle with the function button
• Press enter/start
The next picture will drive the operator in the very easy way how to use the machine
TURN ON THE VEHICLE
ENGINE BEFORE
STARTING
• Press enter/start
After the engine starting if the fluid temperature is too low, it may appear the following message:
OIL TEMPERATURE TOO LOW
WAITING
22°C…………………………………………………………………...>30°C
The above message will appear only when the fluid temperature is lower then 30°C. ATF EXTRA PRO will
proceed automatically when the oil temperature is higher the 30°C.
• Press enter/start
AUTOMATIC CYCLE
MANUAL FUNCTION
SERVICE…
PLEASE CHECK THE
TRANSMISSION FLUID
LEVEL IS OK
To Next Page
