19 USER MANUAL
•
Press enter/start atf extra pro will start the additive injection
OPERATION COMPLETED
CHECK TRANSMISSION OIL
LEVEL
Choose flow control with the button
FLUID TOP UP
FLUID DRAIN
FILL ADDITIVE
FLOW CONTROL
•
Press enter/start
•
After startin the car engine it may appear the following message
OIL TEMPERATURE TOO LOW
WAITING
22°C…………………………………………………………………...>30°C
The above message will appear only when the fluid temperature is lower then 30°C. ATF EXTRA PRO will
proceed automatically when the oil temperature is higher the 30°C.
FLUX IDENTIFICATION
WAIT
ATF EXTRA PRO will show and print the results.
FUNCTION COMPLETED
FLOW DETECTED
To Next Page
