Need help?Do you have a question about the Magnum Energy ME2012 and is the answer not in the manual?
Covers electrical codes, reading manual, insulated tools, jewelry removal, power disconnection, and wiring verification.
Covers eye protection, jewelry, working alone, lifting, battery selection, temperature, ventilation, smoking, cable connection, tools, polarity, short-circuiting.
Details AC and DC grounding procedures, as well as specifications for DC connections to the inverter.
Detailed instructions for mounting the inverter and installing batteries, including safety considerations.
Importance of correct cable selection, DC wiring safety, grounding, and routing negative and positive cables.
Instructions for mounting and connecting the DC fuse block or circuit breaker near the battery for protection, including fuse ratings.
Steps for connecting batteries, performing final checks, powering up the inverter, and verifying AC output.
Describes the two operational modes (Inverter and AC) and the 3-stage battery charging process (Bulk, Absorption, Float).
Explains how the inverter monitors and responds to fault conditions like Low Battery, High Battery, Overload, and Overtemperature.
Provides a chart to help diagnose common inverter failures by matching symptoms to possible causes and recommended solutions.
General| Model | ME2012 |
|---|---|
| Continuous Output Power | 2000 W |
| Surge Power | 4000 W |
| Input Voltage | 120 VAC |
| Output Voltage | 12 VDC |
| Output Current | 100 A |
| Warranty | 2 years |
| Efficiency | 90% |
| Temperature Compensation | Yes |
| Protection Features | Overload |
| Operating Temperature | -20°C to 60°C |
| Charging Stages | 3-stage (Bulk, Absorption, Float) |
To Next Page
