Need help?Do you have a question about the Magnum IA.200 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Signal-to-Noise Ratio | >100dB |
| Damping Factor | >200 |
| THD | <0.05% |
| Output Power | 200W @ 8 Ohms |
| Input Impedance | 47kΩ |
| Dimensions | 430mm x 150mm x 400mm |
Controls for output voltage, muting, and amplifier power status.
Connects multiple inputs and direct CD input for potential sound quality enhancement.
Features ground post, phono input, and auxiliary inputs.
Includes Pre-Out, speaker terminals, ventilation, power input, and fuse holder.
Proper AC connection, grounding, ventilation, and avoiding modifications are essential.
Connect 6-16 ohm speakers; turn volume down before power-on or input selection.
Addresses LED status, fuse blowing, and temporary shutdowns due to overheating.
Details input voltages, outputs, and signal-to-noise ratios for various inputs.
Covers power requirements, maximum output, physical dimensions, and unit weight.
Advises waiting 45 seconds after power off for capacitors to drain safely.
Details labor/parts coverage, warranty period, and common exclusions like misuse.
Explains how to extend the warranty and limitations on liability for damages.
To Next Page