- Adjustment up and down
- To scroll through settings
Right button:
- Push right button in main screen to go straight to Menu settings (1.4)
- Confirming a choice
- - Select an option
Left button:
- Push left button in main screen to go straight to Mode functions (1.3)
- To get back to last screen or main screen
Always go back to the main screen after making changes.
Start up wizard:
Start up menu/ wizard-
After connecting power for the first time, it will take 5 minutes until the first question appears on the
screen. This is due to the internal back up battery charging.
By pushing the symbol √ (right key) you confirm a choice and go to the next screen or option.
If you want to change or check a choice in the start up menu you can press the symbol X (left key) and
go back to the former screen or option.
1. Language:
-make your language choice. This is the first question in the start up menu.
2. Preference choice
-clock; choose 12 or 24 hour clock time (am/pm)
-temperature; choose ºC or ºF scale
3. Program date:
-year; program the current year
-month; program the current month
-day number; program the current day
-program time; program the actual clock time
4. Type of (floor) heating:
Floor heating or different heating system. If you choose a different heating system the thermostat
switches straight to point 11 (below).
Floor construction (if you choose floor heating)
Program the floor depth of the underfloor heating installation.
Choices:
- up to (<) 2 centimetres
- from 2 …….. 5 centimetres
- from 5……….10 centimetres
- more than (>) 10 centimetres
5. Floor covering:
Wood or other. If you choose other, the question is asked if there is a floor sensor installed (yes or no).
To Next Page
Loading...
Need help?
General