Need help?Do you have a question about the Magnum Taylor Products TE100 and is the answer not in the manual?
Describes warning and ESD symbols for safe operation and handling.
Outlines ESD prevention procedures and personal safety rules.
Details product warranty terms and available field service options.
Basic overview of the TE100, manual scope, and system requirements.
Lists and briefly describes the key systems and components of the TE100.
Describes the scale cabinet, its core function, and associated parts.
Details shut off gate, dribble gate, MAC valves, FRL, and control panel.
Describes the spout, bag clamp arms, cylinders, and pads.
Explains start switches, bag position switches, and optional adapters.
Covers inspection for shipping damage and steps for unpacking the equipment.
Who should perform setup and necessary safety precautions.
Steps for physically installing the scale cabinet and ensuring it is level.
Procedures for making electrical connections and wiring the load cell.
Details air supply requirements and lubrication for pneumatic components.
Testing components via dry cycle and calibrating the scale.
Configuring display decimal points and zeroing the weight display.
Calibrating to full scale and adjusting density correction settings.
Setting over/under weight limits and adjusting the dribble gate.
Procedure for installing the optional small bag adapter.
Description of the control panel buttons, knobs, and display.
Steps to perform before the first operational use of the TE100.
Step-by-step guide for the typical bag filling process.
Tips for ensuring optimal performance and efficiency.
Importance of maintenance and daily upkeep procedures.
Procedures for monthly inspection and servicing of components.
General method for problem diagnosis and list of common issues.
Troubleshooting inaccurate readings and scale not returning to zero.
Troubleshooting weight fluctuations and auto-correction failures.
Troubleshooting bag drop, filling, cylinder, and valve issues.
Overview of adjustments and specific procedures for clamps, gates, and valves.
Steps for replacing the spout and the load cell.
Procedures for replacing dribble and shut off gate components.
Procedures for replacing bag clamp arms, springs, cylinders, and pivot blocks.
Procedures for replacing air lines, fittings, and the main circuit board.
Definitions of technical terms used in the manual.
Crucial safety precautions for operating and servicing the TE100.
A comprehensive list of spare parts with part numbers.
References to available mechanical drawings for the TE100.
References to available electrical drawings for the TE100.
To Next Page
General