EasyManua.ls Logo

Mahindra ALTURAS G4 2019 - Immobiliser System

Mahindra ALTURAS G4 2019
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-12
© Copyright Mahindra and Mahindra Ltd. 092018
5.4 Immobiliser System
The immobiliser System provides an additional theft deterrent to
the vehicle in which it is installed and prevents it from being started
by unauthorised persons. The transponder integrated in the key
and the engine control unit have the same code. When the ignition
key with the integrated transponder is turned to the ON position,
the ECU (Engine Control Unit) checks the crypto code of the key
and, if correct, allows your vehicle to start the engine.
Immobiliser Key
When the ignition key with the integrated transponder is turned to
the ON position, the ECU (Engine Control Unit) checks the crypto
code of the key and, if correct, allows your vehicle to start the
engine.
Avoid impact to the transponder inside of the key. The
transponder could be damaged
With a damaged transponder, the engine cannot be started
Do not instal any metal object near the ignition switch and on
the remote control key. Otherwise, they may disturb the
signal between ignition switch and remote control key and
result in engine starting problem
The time needed for communication between the immobiliser
key and ECU can vary. If it is very short, the immobiliser
indicator does not come on.
In addition, any remote engine starter cannot be installed to
the vehicle equipped with the immobiliser system. So never
instal any remote engine starter
The immobiliser system should be inspected, replaced,
serviced, or coded by only qualified service personnel in a
Mahindra Dealer or Mahindra Authorised Service Centre
When an old code should be replaced or another key is
added, please observe the process personally
Y4E016
Supervision cluster
Standard cluster
CONVENIENCE SYSTEM I

Table of Contents

Related product manuals