Mahindra ALTURAS G4 2019 - Operation of Heater and A;C Control

5-66
© Copyright Mahindra and Mahindra Ltd. 092018
5.27 Operation Of Heater And A/C Control
5.27.1 Heater And A/C ON/OFF
• Pressing ON/OFF switch (1) turns ON the climate control
system. The system is turned on with previous status resumed
• Pressing the ON/OFF switch again (1) turns off the system
5.27.2 Driver/Passenger Side Temperature Control
Switch
Press the driver side temperature control switch (1) to set the
temperature on the driver side:
• Operating this switch with the SYNC indicator (3) ON changes
the passenger side temperature simultaneously
• The set temperature can be changed in 0.5°C graduations with
this switch
5.27.3 Independent Temperature Control
• Press the SYNC switch (4) or driver side temperature control
switch (2)
• The SYNC indicator (3) is turned off
• Under this condition, the temperature setting for the driver and
front passenger sides are controlled independently
5.27.4 SYNC With Driver Side Temperature
• Press the SYNC switch (4)
• The SYNC indicator (3) is turned off
• The temperature setting for both the driver and front passenger
sides is controlled by the driver side temperature control
• If temperature is set to LO:
The system is automatically set to A/C ON, vent mode,
recirculation mode.
• If temperature is set to HI:
The system is automatically set to A/C OFF, foot mode, fresh
air mode.
1
Indicator
4
3
2
1
CONVENIENCE SYSTEM I