EasyManua.ls Logo

Mahindra ALTURAS G4 2019 - Page 219

Mahindra ALTURAS G4 2019
340 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
© Copyright Mahindra and Mahindra Ltd. 092018
5-67
AUTO Control
Use this feature while the engine is running:
If the AUTO switch (1) is pressed, the indicator on the switch is
turned on
Set the temperature as desired using the temperature control
switch (2)
The fan speed and air distribution mode are controlled
automatically based on the set temperature, indoor
temperature, and outdoor temperature
Pressing recirculation/fresh air switch, fan speed dial, air
distribution mode switch, A/C switch, or defroster switch in
AUTO mode deactivates the AUTO mode and the system is
set to manual mode (The indicator on the AUTO switch goes
off)
Manual Control
Use this feature while the engine is running:
1. Press the ON/OFF switch (1)
2. Set the temperature as desired using the temperature control
switch (2)
3. Turn the fan speed dial (3) to adjust the amount of air flow
4. Press the air distribution mode switch to select the direction of
the air flow
5. Press the recirculation/fresh air switch (4) to select the air
source
6. Press the air conditioner switch (5) to use A/C
Pressing the AUTO switch in manual mode changes the climate
control system to AUTO mode and the climate functions are
controlled automatically based on the set temperature.
Indicator
22
1
22
4
1
5
3
CONVENIENCE SYSTEM I

Table of Contents

Related product manuals