Mahindra ALTURAS G4 2019 - Tyre

© Copyright Mahindra and Mahindra Ltd. 092018
8-23
8.8 Tyre
8.8.1 Tyre Inflation Pressure
Tyre Inflation Pressure
Type Tyre
Wheel
Tyre Inflation
Pressure
Driving Tyre 255/60R18
7.5JX18
34 psi
Wheel Alignment and Balance Between Tyre and Wheel
If the wheels are not aligned as specified, it leads to uneven and
faster wear of tyre and the vehicle pulls to one side. If the wheels
and tyres are not balanced, it could result in uneven wear of tyre
and vehicle vibration. If the above symptoms occur, immediately
stop driving and have the vehicle checked at a Mahindra Dealer or
Mahindra Authorised Service Centre.
• Maintaining the specified tyre pressure is essential for
comfortable riding, driving safety, and long tyre life. Incorrect
inflation pressures will increase tyre wear and will impair
safety, vehicle handling, comfortable driving and fuel
economy. Always make sure that the tyre inflation pressure
is correct
• Check and adjust the tyre inflation pressure, including the
spare wheel, prior to any long journey (before the tyre is
heated up)
• Even the temporarily installed spare tyre should be inflated
properly
The tyres should be checked before they are heated up using
an tyre pressure gauge. Increase the tyre inflation pressure by
4~5 psi from the specified value prior to any long journey.
Y4H061
Under
in󰘱ation
Proper
in󰘱ation
Over
in󰘱ation
MAINTENANCE SCHEDULE AND MANAGEMENT