For rapid heating of the cabin, the following AC settings are recommended:
1.
Make sure that all the windows are fully closed
2.
Set the blower to maximum speed
3.
Switch ON the heater by pressing the heater button
Once the passenger compartment reaches a comfortable temperature, the blower speed can be readjusted as
desired.
In extreme cold weather conditions, the engine coolant takes time to get heated up. Hence it might take a while for
hot air discharge, even though blower is running and temperature control knob is set to hot position.
Do not use the heater for a prolonged period. Switch off the heater once the desired cabin temperature has been
reached.
9.8.3 De-mist (If Equipped)
For de-misting the windshield, follow the below procedure;
1.
Make sure that all the windows are fully closed
2.
Set the blower to maximum speed
3.
Switch ON the heater. Hot air flows out of the center and side vents.
4.
Switch ON de-mister. Hot air from the center vents will be diverted to the windshield center vents
5.
For improved performance, close the side vents for full hot air flow towards windshield
10 STARTING AND DRIVING THE VEHICLE
10.1 Safety Tips - Before Starting your Vehicle
10.1.1 General
•
Before starting the vehicle, inspect the inside and outside of the vehicle ; look for any damages, leaks, loose parts,
foreign objects/debris. Contact an Authorized Mahindra Dealer if required.
To Next Page
Loading...
