CARBURETTOR
Engine must be warm before setting idle speed. To warm up the engine
10 minutes of stop and go riding is sufficient.
After warming up, put the motorcycle on main stand.
Adjust the idle speed by throttle screw(1). To increase idle speed, turn the screw
clock wise and to decrease the idle speed, turn the screw anti clockwise.
Idle speed
Idle speed - 1400 RPM 0 ± 100
CAUTION:
Idle speed may not be stable inspite of frequent idle setting, due to
faults in intake systems other than carburettor. Visit your Authorised
Mahindra Two Wheeler dealer for proper diagnosis and rectification.
A) To decrease idle speed
B) To increase idle speed
42
1
A
B
To Next Page
Loading...