A
B
A) Decrease Free Play
B) Increase Free Play
CAUTION:
Even after adjusting free play properly, clutch
in shifting gear, visit your Authorised Mahindra Two Wheeler dealer.
slips or there is difficulty
Clutch adjustment may be required if
1) Motorcycle stalls while shifting gear.
or
2) Clutch slips (Acceleration to lag behind
the engine speed)
l Adjust the free play (1) to 2 ~ 5 mm at
clutch lever (2) as shown , by loosening the
lock nut (3) and turning the adjusting nut
to obtain the specified play.
l Tighten the lock nut and confirm the play.
l Start the engine, press in the clutch lever
and shift the gear from neutral to first.
Make sure that engine does not stall or the
vehicle does not creep.
l Release the clutch lever gradually and
open the throttle. The motorcycle should
start moving smoothly and accelerate
in accordance with the engine speed.
CLUTCH
43
1
2
3
To Next Page
Loading...