Mahindra mHAWK XYLO E9 - Page 21

Diagnostic Manual (IC) MAN-00179
Xylo mHawk (E9) Feb 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
21
B1806 - Glow Plug Feedback lamp not working
GLOW PLUG LAMP
Glow plug lamp indicates that glow plug is ON. During ignition ON, the glow plug lamp is ON and goes
OFF when the glow plug reaches the required temperature
DTC Summary Probable cause
Normal Operation
 During ignition ON, the glow plug lamp is ON
continuously till glow plug reaches the required
temperature
DTC detection condition
 .Ignition ON
 During self check by IC , the glow plug lamp is OFF
continuously
Lamp status
 Glow plug lamp will be OFF permanently
Reaction
 No Glow plug lamp indication when glow plug is ON
Healing condition
 Ignition OFF/ON
 Faulty Instrument
Cluster