Mahindra Quanto User Manual

DIAGNOSTIC MANUAL MAN-00201
QUANTO EMS SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
`
CONTINIOUS TORQUE MONITORING
DTC Description
P1633 ECU Monitoring: PoI2 qty error
P1634 ECU Monitoring:PoI2 shut off error
P1635 ECU Monitoring:PoI3 efficiency factor error
P1637 ECU Monitoring: Injection quantity correction error
P061B ECU Monitoring: Torque comparison error
P163E ECU Monitoring: Torque monitoring level2 error
P1639 ECU Monitoring: Lead torque monitoring level2 error
P163D ECU Monitoring: Set torque monitoring level2 error
DTC INFORMATION
PROBABLE CAUSES OF
FAILURE
NORMAL OPERATION
 Ignition ON
 The voltage monitoring of the injector energizing time is
found normal
DTC DETECTING CONDITIONS
 Ignition ON
 EMS ECU supply voltage 8-16V
 The difference between the programmed energizing time
and the measured energizing time exceeds the limit
DTC REACTIONS
 Engine Check lamp continuosly ON
HEALING CONDITION
 Ignition Off/On
 Faulty EMS ECU
292

Mahindra Quanto Specifications

General

Brand	Mahindra
Model	Quanto
Category	Automobile
Language	English