Diagnostic Manual (MBFM) MAN-00068-91
October 2009/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The
methods may be modified as a result of changes introduced by the manufacturer in the production of the various component units and
accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd.
The use of this document by any person other than the
trained personnel, at the Authorised Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for
penalty/prosecution© 2009 Mahindra & Mahindra Ltd.
Replacing the MBFM Unit
After the MBFM unit has been physically replaced, the remote key has to be learnt to the
new MBFM unit, if the vehicle is equipped with Remote Keyless entry feature (RKE).
For Remote learning, the MBFM diagnostic tool needs to be connected.
Remote Learning (RKE)
The screen shots of each steps are given in the next pages.
Important Note -
1. Follow instructions as it appears in the bottom window of the MBFM diagnostic tool
2. If 2 keys are taken up for programming and if the tool is closed before the second key is learnt, then
the process is incomplete and hence the first key will also be inactive.
3. Whenever a MBFM unit is replaced, it is required to re-learn the existing remotes to the new MBFM
unit.
4. Before replacing the MBFM unit, take the approval of the TEKliner/TEKhub.
To Next Page
Loading...
