11-2
© Copyright Mahindra & Mahindra Ltd.042015
(C): R:This is the Tire Construction Code. The “R” stands for Radial.
(D):16 (Two-digit number):This number is the wheel or rim diameter in inches.
(E):105 (Two or three digit number): This number is the tires load index. It is a
measurement of how much weight each tire can support.
(F):S:Tire speed rating or speed symbol. Never drive the vehicle faster than the tire
speed rating. The speed rating denotes the speed at which a tire is designed to be
driven for extended periods of time under a standard condition of load and inflation
pressure. S denotes a speed rating of 180 km/hr.
Speed Rating
SPEED SYMBOL
MAX SPEED
CAPABILITY
SPEED SYMBOL
MAX SPEED
CAPABILITY
KM/HR
KM/HR
L 120 T 190
M 130 U 200
N 140 H 210
P 150 V 240
Q 160 W 270
R 170 Y 300
S 180 Z 240+
Tire Pressure Placard
SYSTEMS
ENGINE MAXIMILE Feo
MAXIMILE Elite
MAXIMILE Syntec F2
MAXIMILE ULTRACOOL
CAS TROL/SHELL DOT 4
SHELL SPIRAX S3 ATF MD3
AXLE
TRANS MISS ION
BRAKE/CLUTCH
POWER ST RG
ENG COOLANT
RECOMMENDED OIL
THAR CRDe
REAR
FRONT
TYRE P RES SURE Kg/cm
2
(psi)
UNLADEN
TYRE S IZE
235/70 R16
TUBELESS
2.4(34)
2.4(34)
2.4(34)
2.4(34)
LADEN
U52M03
TIRE INFLATION PRESSURE kg/cm
2
(Psi)
Front
2.4 kg/cm
2
(35 Psi)
Rear
2.4 kg/cm
2
(35 Psi)
Tire Label (Vehicle Placard) tells you important information about tire size designed
for your vehicle, and the laden/unladen tire inflation pressures for the front & rear
tires. The label is pasted above the driver door trim.
Never overload your vehicle. Overloading can cause tire failure, affect vehicle
handling, and increase your stopping distance, resulting in an accident and/or
personal injury.
Improper inflated tires can adversely affect vehicle handling or can fail
unexpectedly, resulting in an accident and/or personal injury.
Under-inflation is the most common cause of tire failures and may result in
severe tire cracking, tread separation or “blowout”, with unexpected loss of
vehicle control and increased risk of injury. Under-inflation increases sidewall
WHEELS AND TIRES
To Next Page
Loading...
