Mahindra Thar CRDe - In Car Repairs; Adjustment of Clutch Pedal Height

Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
In Car Repairs
 Adjustment of clutch pedal height.
Loosen the lock nut of master cylinder’s push rod
fork.
Slide backs the dust cover.
Rotate the master cylinder push rod till desired
height of pedal is achieved.
Tighten the lock nut of push rod fork.
Screw in pedal stopper bolt completely.
Press pedal fully till the pedal bottoms on the floor.
Now screw out the pedal stopper bolt till it touches
Page 129