Repair Manual MAN-00190
THAR CRDe BS-IV MAY 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part or whole of the present
document, are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of
Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution© 2012 Mahindra & Mahindra Ltd.
Clutch Actuation Mechanism –
The clutch actuation is hydraulic actuation. The clutch pedal actuates a master cylinder. The hydraulic
fluid is transmitted to the slave cylinder through Bundy tubes.
The slave cylinder actuates a fork, which is pivoted on a ball pivot. The other end of the fork; a release
bearing on a carrier actuates the diaphragm springs.
• Master cylinder overhaul
• Slave cylinder overhaul.
• Slave cylinder and Concentric bearing Overhaul
To Next Page
Loading...
